Genoa Measurement form for hanks or foilsPlease enable JavaScript in your browser to complete this form.Name *FirstLastEmail *Type of Boat/Make/ModelLocationRig TypeMast HeadFractionalOtherForestayWire/HanksTuff LuffHarken Carbo LuffOtherWith a tape attached to the halyard pulled all the way up measure to base of mast.With the tape all the way up measure to forestay pin at bow fitting.With the tape all the way up measure to upper shroud pin at deck level.With the tape all the way up swing it out and around the shrouds, pull the tape tight and let it travel up the shrouds as far as it wants to. Measure down to the leading end of the genoa track.With the tape all the way up swing it out and around the shrouds, pull the tape tight and let it travel up the shrouds as far as it wants to. Measure down to the aft end of the track.At deck level. Measure from the forestay pin at the stem back to the leading edge of the track in as straight a line as possible. Do not go out and around the shrouds or stantions.At deck level. Measure from the forestay pin at the stem back to the aft end of the track in as straight a line as possible.Measure from the pin at the stem to the top of the turnbuckle if hanks or to the prefeeder if a foil.Other information as needed.WebsiteSubmit