Genoa Measurement Form Roller FurlingPlease enable JavaScript in your browser to complete this form.Name *FirstLastEmail *Type of Boat/Make/Model *Location *Rig TypeMast HeadFractionalOtherFurling System make and modelHarkenSchaeferFurlexProfurlCDIOtherWith a tape attached to the halyard pulled all the way up measure to base of mast.With the tape all the way up measure to forestay pin at bow fitting.With the tape all the way up measure to upper shroud pin at deck level.Drop the halyard and attach it to the shackle on the head swivel. Attach the tape to the schackle on the head swivel for the sail. Pull the sail all the way to the top and secure. Measure down to the shackle on top of the drum. This is Max Hoist for the genoa. *With the tape attached to the head swivel and pulled up all the way up swing it out and around the shrouds, pull the tape tight and let it travel up the shrouds as far as it wants to. Measure down to the leading end of the genoa track.With the tape attached to the head swivel and pulled up all the way up swing it out and around the shrouds, pull the tape tight and let it travel up the shrouds as far as it wants to. Measure down to the aft end of the track.At deck level. Measure from the forestay pin at the stem back to the shackle on the top of the furling drum with the shackle pulled up as if the sail was attached to it.At deck level. Measure from the shackle on the drum pulled up as if the sail was attached to it back to the leading edge of the track in as straight a line as possible. Do not go out and around the shrouds or stantions.At deck level. Measure from the shackle on the drum pulled up as if the sail was attached to it back to the aft edge of the track in as straight a line as possible. Do not go out and around the shrouds or stantions.Measure from the pin at the stem to the top of the turnbuckle if hanks or to the prefeeder if a foil.Other information as needed.WebsiteSubmit